Udarne i rasklopne struje kratkog spoja prema standardu IEC 60909

U radu se obrađuje kratki spoj u elektroenergetskim mrežama prema IEC 60909 standardu. Objašnjen je proračun impedancija kratkoga spoja za pojedine dijelove elektroenergetske mreže, te proračun početne, udarne i rasklopne struje kratkog spoja. Naglasak je na trofaznom i jednofaznom kratkom spoju. Kr...

Full description

Permalink: http://skupnikatalog.nsk.hr/Record/fer.KOHA-OAI-FER:47950/Details
Glavni autor: Kristek, Hrvoje (-)
Ostali autori: Pavić, Ivica (Thesis advisor)
Vrsta građe: Drugo
Impresum: Zagreb, H. Kristek, 2017.
Predmet:
LEADER 02159na a2200241 4500
003 HR-ZaFER
005 20190731122515.0
008 160221s2017 ci ||||| m||| 00| 0 hr d
035 |a (HR-ZaFER)ferid5248 
040 |a HR-ZaFER  |b hrv  |c HR-ZaFER  |e ppiak 
100 1 |a Kristek, Hrvoje  |9 39788 
245 1 0 |a Udarne i rasklopne struje kratkog spoja prema standardu IEC 60909 :  |b završni rad /  |c Hrvoje Kristek ; [mentor Ivica Pavić]. 
246 1 |a Peak and breaking current according to standard IEC 60909  |i Naslov na engleskom:  
260 |a Zagreb,  |b H. Kristek,  |c 2017. 
300 |a Razl. pag. ;   |c 30 cm +  |e CD-ROM 
502 |b preddiplomski studij  |c Fakultet elektrotehnike i računarstva u Zagrebu  |g smjer: Elektroenergetika, šifra smjera: 34, datum predaje: 2017-06-09, datum završetka: 2017-09-20 
520 |a U radu se obrađuje kratki spoj u elektroenergetskim mrežama prema IEC 60909 standardu. Objašnjen je proračun impedancija kratkoga spoja za pojedine dijelove elektroenergetske mreže, te proračun početne, udarne i rasklopne struje kratkog spoja. Naglasak je na trofaznom i jednofaznom kratkom spoju. Kratki spoj je podjeljen na kratki spoj blizu generatora te kratki spoj daleko od generatora. Na kraju rada nalaze se proračuni kratkog spoja jedne test mreže provedeni na tri naponske razine: 110, 10 i 0.4 kV.  
520 |a This paper deals with short circuit faults in power grids according to the IEC 60909 standard. The short-circuit impedance calculation for individual parts of the power grid is explained, as well as the calculation of the initial, peak and breaking current of the short circuit. The emphasis is on three-phase and single-phase short-circuits. The short circuit fault is divided into a short circuit fault near the generator and a short circuit fault away from the generator. At the end of the paper, the short-circuit calculations of one test network are calculated at three voltage levels: 110, 10 and 0.4 kV. 
653 1 |a udarna  |a rasklopna  |a struja  |a kratki  |a spoj  |a iec  |a 60909 
653 1 |a peak  |a breaking  |a current  |a iec  |a 60909  |a short  |a circuit 
700 1 |a Pavić, Ivica  |4 ths  |9 9476 
942 |c Z  |2 udc 
999 |c 47950  |d 47950